Used in 898 recipes at an average of 1.261%.
Nice and thick, creamy vanilla malt marshmallow milkshake.
TPA VBIC + FA Vanilla Ice Cream provides the ice cream base. TPA VBIC works fine on its own @ 3%, but FA Vanilla Ice Cream complements it nicely. This combination also allows the TPA VBIC to be used at a lower concentration, which will help to greatly reduce or even eliminate the "peppery" flavor that some people get.
TPA Malted Milk + FW Hazelnut is the malt. These two flavors work amazingly well together as a malt base. TPA Malted Milk is extremely "potent" to me – using it at anything more than 1.25-1.5% completely overpowers everything else in a mix, while I see many recipes using it much higher. So you might need to increase the TPA Malted Milk from the 1% I am using here.
CAP Whipped Marshmallow + TPA Marshmallow obviously gives the marshmallow. I chose CAP Whipped Marshmallow as the main ingredient here, since its light and airy mouthfeel is a great way to help keep things from being bogged down. I tried TPA Toasted Marshmallow, which actually worked out pretty well, but I felt the recipe was starting to get a bit too "busy". If you would like to try it anyways, then go with 1.5% TPA Toasted Marshmallow and 1% CAP Whipped Marshmallow.
INW Shisha Vanilla boosts the vanilla flavor up a tiny bit. I didn't go very high here, because it would overpower the delicate marshmallows.
TPA Whipped Cream is there because all milkshakes need whipped cream.
CAP Vanilla Custard at the small amount of 0.5% doesn't alter the flavor much at all, but it helps tie everything together. I started out at 1%, but it added too much "butteryness", and began to encroach on the lighter flavors, like the whipped marshmallow and whipped cream.
It's definitely vapeable as a S&V, but definitely needs at least a week to meld.
This also works great as a base for other milkshake recipes. Depending on what you want to add, consider omitting the malt (the combination of TPA Malted Milk and FW Hazelnut). For example, when adding some caramel, cake / cookie, or especially some chocolate, keeping the malt might definitely be a great option. But if you want to add strawberry, banana, or other fruit, you probably would want to leave it out. One exception is when adding a cereal (like FW Fruity Flakes, or any of the dozens of other cereal flavorings available), where I'd recommend dropping the TPA Malted Milk but leaving in the FW Hazelnut. In a cereal recipe, FW hazelnut at low concentrations, as here, does a great job transforming the milk and cream flavorings into the milk left over after eating a bowl of cereal.
Note: I vape almost exclusively on RDA's at fairly high wattages (100-120 watts on average, and rarely anything below 80 watts), so my recipes tend to have less amounts of flavoring than average. Depending on your hardware and preferences, you may need to increase everything slightly. Using 1.25x - 1.5x what is listed here will put the total flavor concentration at 11.25–13.5%, which is more in line with what seems to be typical.
It's SaturDIY'ing with fresh03 and Friends! And we're doing Cats and Dogs! today! I have a pretty kitten that isn't mine but loves to hang out with me and she's the sweetest little talker. Also, Fresh's cats love to be live on stream every Saturday and they're YouTube divas.
FA Marshmallow = it's my favorite marshmallow of them all.
OOO Marshmallow Vanilla/FLV Marshmallow Vanilla = That's the body of the marshmallow and hopefully it also helps the marshmallow last longer.
FA Milk/VT Love DIY = the milk combo, nice fresh milk with a good body of creamy white chocolate goodness for the mouthfeel.
TPA Malted Milk = does the cereal milk trick without the cereal.
OOO Powdered sugar = to sweeten all of it and still give the marshmallow a little structure.
Marshmallow is a flavor that fades quickly, so my advice is mix a 30ml of it at a time.
Enjoy, be queer and vape on!
Cécile aka Queer Your Vape
[Photo credits: HILARY HIGGINS ]
Vanilla pound cake dipped in milk!
Sweeten to taste.
I used the Charlie Noble's cereal milk trick of TFA Malted and Cap Vanilla custard with a touch of OOO Cream Milky Undertone.
Pound Cake and Yellow cake provide a nice mellow vanilla pound cake, cake batter, butter cream, and VT pudding base provide the butter accentuation and help fill in the body of the pound cake.
Inspired on (stolen indeed) @mlNikon scream with the straws a bit hi and a substitution of inw shisha strawberry by tpa strawberry .
Added a little malted milk and fa cream fresh to help the fw hazelnut with the malt part instead of increaing the hazelnut flavor and pushing the dairy cream note. The rest stays the same because there is no need to change the perfection of the slow deicide recipe.
Great job Emily.
Thanks for share your work.
Here’s @mlNikon recipe: https://alltheflavors.com/recipes/105311#slow_deicide_by_mlnikon
Hope you like it.
Based off Wayne's Quik ( https://diyordievaping.com/2018/02/19/quik-strawberry-malted-milk-diy-e-liquid-recipe/ )
Used the cream/malt base and subbed out strawberries for banana.
I have been on the hunt to find a juice that tastes like the Pink Nesquik. After a couple of misses trying to mix this I think I have finally gotten close. I still want to try and swop out the TFA Vanilla Custard with FA Custard Premium to see if it creates a more mouthful of creaminess when paired with the creams. I have dropped the Malted milk down to 2.5 where it was previously at 4, it can be a bit overwhelming at such a high percentage.
I have mixed this at 70/30 and let it steep for about a week and it tasted amazing. I then left it to steep one more week and OMG, I cannot put down my Vape. This is definitely a winner, although I feel it can still be tweaked slightly to make it even more amazing. Maybe a V2 on the way